PhD in Mechanical Engineering, University of Minho
Master in Manufacturing Technologies, University of Minho
Degree in Biological Engineering, University of Minho
Product development, numerical modeling, fluid dynamics, heat transfer, structural and multiphysics analysis

Graduation and Master's degrees in Mechanical Engineering with a specialisation in Structures, University of Minho
Technical Project Management, Product Development, 3D Modeling, Numerical Modeling, Structural Analysis,
Mechanics of Composite Materials, Mechanical Testing

Product Designer, University of Minho
Product design and development
Design Thinking
3D Modeling
Rendering
Design

Master's degree in Materials Engineering, University of Minho
Project management; R&D activities
Selection of Materials;
Polymer Characterisation

Integrated Master's Degree in Mechanical Engineering, University of Minho
Numerical modeling
Structural analysis
Product development
Mechanical tests

Industrial Designer, Escola Superior de Design, IPCA
Product development
CAD modeling
Additive Manufacturing
Communication and product representation

Degree in Electrical Engineering, Regional University of Blumenau – FURB (Brazil)
PhD student in Electronic and Computer Engineering, University of Minho
Electrical circuits and power electronics
Conceptualization and development of electronic systems integrated into thermoplastic parts
Electromagnetic simulations applied to the development of thermoplastic products

Integrated Master in Polymer Engineering, University of Minho
Numerical modeling
3D Modeling
Polymeric and composite materials
Structural analysis
Product development

Master's in Design and Product Development, IPCA
Industrial Designer
Specialisation in UX/UI Design
Research and development
User Experience
Design Thinking

Integrated Master's Degree in Mechanical Engineering, University of Minho
Mechanical projects
Structural numerical simulation
Electromagnetic numerical simulation
R&D activities

Degree in Mechanical Engineering - State University of Rio de Janeiro (UERJ)
Degree in Mechanical Engineering - Polytechnic of Leiria (ESTG)
Postgraduate in Offshore Floating Systems Engineering - Federal University of Rio de Janeiro (UFRJ)
MBA in Strategic Management of Maintenance and Production - Federal Fluminense University (MBA)
Postgraduate in Numerical Flow Analysis by CFD - Engineering Simulation and Scientific Software (ESSS)
Master degree in CFD with Ansys - Polytechnic of Madrid (UPM) – (Master Thesis, last semester)
Numerical simulations, CFD, Ansys, Computational Fluid Dynamics, Mesh
Aerodynamics, Heat Transfer, Turbomachinery, Multiphase Flow, FSI, Turbulence, Thermodynamics

Degree in Product Design
Product Designer
Communication Designer

Ph.D. Degree in in Science and Polymer Engineering and Composites, University of Minho
M.Sc. Degree (before Bolonha) in Processing and Characterisation of Materials, University of Minho
Degree in Polymer Engineering, University of Minho
Thermoplastic conventional and non convetional injection moulding, in-mould electronics (IME) e in-mould decoration (IMD), process simulation, thermoforming, material characterisation, printed electronics ( inkjet printing, screen printing, flexible and stretchable electronics).

Master's degree in Polymer Engineering, University of Minho
In-Mould Electronics (IME) and In-Mould Decoration (IMD) technologies
Thermoforming and screen-printed electronics

Master's degree in Polymer Engineering, University of Minho
Conventional and unconventional injection moulding and thermoforming
Numerical simulation of the conventional and unconventional injection moulding process (support for mold development and process definition)
Printing technologies: screen printing

Master's degree in Polymer Engineering, University of Minho

Polymer Engineering Student, University of Minho
Setup, optimisation of injection processes
Tests and quality problems solving
Preventive maintenance of equipment

PhD in Polymer Science and Engineering, University of Minho
Computational mechanics, constitutive modeling of polymeric materials, structural integrity assessment of critical components
Technical manager in several projects (European and national) in the areas of materials science, computational mechanics and monitoring the structural integrity of critical components

PhD in Science and Engineering of Polymers and Composites, University of Minho
Master's degree in Materials Engineering, University of Minho
Experimental simulation tests of the space environment
Characterisation of materials
Processing of polymer composites
Integration of sensors for structural monitoring and the production process of composite materials

PhD in Mechanical Engineering
Master's degree in Textile Engineering, University of Beira Interior
Thermosetting and thermoplastic composite materials
Sensing and testing of composite systems
Simulation of composite manufacturing processes (RTM, VARI, filament winding and thermoforming)
Analysis and testing of composite materials
Ultrasonic non-destructive testing (NDI)
Rheological analysis and tests; Transport phenomena
(Fluid Dynamics, analysis and simulation of fluid flow)
Analysis and testing of materials (mechanical, thermal and surface)
Textile materials (analysis, testing and manufacturing)

Degree in Mechanical Engineering, FEUP, in the area of Mechanical Constructions
Sizing and specification of reservoirs, pipes and various equipment and accessories
Manufacture of equipment made of fiberglass-reinforced plastics
R&D and standardization applied to the sector

Integrated Master's Degree in Materials Engineering, University of Minho
3D Modeling, GD&T, Prototyping and Jig Development
R&D in the areas of intelligent and functional materials
Industrialisation and processing of textile materials
Mechanical and chemical characterisation of materials

Master's Degree in Chemical Characterisation and Analysis Techniques, University of Minho
Degree in Biochemistry, University of Minho
Chromatographic techniques (GC; HLPC)
Spectrometric techniques (EAA)
Microscopic techniques (TEM)
Validation of analytical methods

Degree in Biotechnology, Polytechnic Institute of Viana do Castelo
Master's Degree in Chemical Characterisation and Analysis Techniques, University of Minho
Laboratory Technician in the Pharmaceutical, Chemical and Polymer Industry
Chromatography (HPLC and GC), thermal (DSC and TGA), FTIR, UV-Vis techniques

Master in Materials Engineering, University of Minho
Project Management

Master's degree in Polymer Engineering, University of Minho
Management of production planning and factory maintenance
Film compounding and extrusion
Characterisation of polymers
R&D activities
PhD student of Science and Engineering of Polymers and Composites

Master in Engineering and Materials Technology, Pontifical Catholic University of Rio Grande do Sul (PUCRS)
Postgraduate in Project Management, ESIC Business & Marketing School
Product research and development; Synthesis and formulation of thermoplastic polyurethanes; Synthesis of polyesters for polyurethanes; Formulation of epoxy resins and polyureas for protective coatings; Quality tools

Master in Polymer Engineering, University of Minho
Extrusion and Compounding
Characterisation of Polymers
R&D and Design Thinking
Interaction Design, Ergonomics and Usability
Master's student in Product Design and Development, IPCA

Master's Degree in Industrial Engineering and Management, University of Porto (FEUP)
Project management

PhD in Polymer Science and Technology, Institute of Macromolecules Professor Eloisa Mano, Federal University of Rio de Janeiro
Architect and Urban Planner, Faculty of Architecture and Urbanism, Federal University of Rio de Janeiro
Research expertise on polymers recycling, natural fibres reinforced composites, polymers characterisation and processing – extrusion, injection moulding, rotomoulding, synthesis and modification of nanomaterials for polymer nanocomposites.

Integrated Master in Chemical Engineering, University of Coimbra
Specialisation in Biosystems

Degree in Industrial Chemistry, University of Beira Interior
Extrusion and compounding
Characterisation of polymers
R&D activities
Quality control in injection and extrusion processes
Pigments and dyes for polymers

PhD in Inorganic Materials & Catalysis, Chemistry & Chemical Engineering from the Technical University of Eindhoven
Master in Organic Chemistry and Natural Products
Degree in Biochemistry, University of Aveiro
Valorization of Biomass, Organic Synthesis
Accounting, Administration

PhD in Science and Engineering of Polymers and Composites, UMinho
Integrated Masters in Biomedical Engineering, UMinho

Degree in Biotechnology, Ponte de Lima Higher School of Agriculture
Master's student in Materials Engineering, University of Minho
Valorisation of By-products; Composites; Powder Bed Fusion - Polymers; Research and Development

PhD in Biology, University of Porto
Environmental and Economic Efficiency & Project Management
Tools/Methodologies: Life Cycle Assessment (LCA), Environmental Product Declaration (EPD), Product & Organizational Environmental Footprint (PEF & OEF), Carbon Footprint of products & organizations.
Internal and external trainer (ID F733200/2022).
Internal auditor

Degree and Master in Bioresources, ISEP
Training in Circular Economy, FEUP
Postgraduate in Integrated Quality, Environment and Safety Management Systems, ISEP
Higher Technical Course on Occupational Safety
Laboratory quality control in the areas of paints and food
Environmental consulting

Integrated Master in Biological Engineering in the field of Environmental Technologies, University of Minho
Environmental management
Life Cycle Assessment (LCA)
Biotechnology
Waste Management
Health and safety
Sustainability

Degree in Environmental Engineering, ESAPL
Life Cycle Assessment (LCA)
Sustainability
Trainer
RecyClass Auditor

Integrated Master in Environmental Engineering, FEUP
Life Cycle Assessment
Carbon Footprint of products & organizations
Sustainability

PhD in Civil and Environmental Engineering - Federal University of Paraíba (UFPB)
Master's degree in Civil and Environmental Engineering - UFPB
Degree in Environmental Engineering - UFPB
Environmental Life Cycle Assessment (LCA)
Social Life Cycle Assessment (S-LCA)
EPD Individual Verifier
Internal Auditor
Sustainability

Integrated Master´s Degree in Mechanical Engineering Specialization in Mechatronic Systems- University of MInho

Mathematics and Statistics
Data preparation
Analysis of results

Degree in Management, University of Minho | Rotterdam Business School
Postgraduate in Accounting, University of Minho
Certified Accountant
Project financial management
Financial analysis and management control
Business plans
Accounting
Public procurement

Graduate in Management, University of Trás-os-Montes e Alto Douro
Financial, Accounting and Purchasing Area
Advanced Excel

Degree in International Relations, University of Minho
Degree in Social Communication, University of Minho
Institutional Communication, Digital Marketing, Copywriting, Press, Image, Video, Radio, Websites, Content Production and Management, Translation

Bachelor´s degree in Communication Sciences, Portuguese Catholic University, Braga.
Social Media Management, Digital Marketing, Communication Mananagement

Student of PD-TERM&SC, University of Minho
Master's degree in Biomedical Engineering, University of Porto (FEUP)
Degree in Biochemistry, University of Porto (FCUP)
Development and Characterisation of Biomaterials
3D Bioprinting

Bachelor's Degree in Psychology, University of Trás-os-Montes and Alto Douro (UTAD)
Master's Degree in Work and Organizational Psychology, University of Minho